If water is not clear, check the following:
• Check that the UVC Filter is operating. If the UVC lamp has overheated due to lack
of water flow it will automatically turn off. Allow lamp to cool then reconnect.
• Replace UVC bulb if it has not been replaced in the past year, even if it is operational.
• Check that the quartz sleeve is clean and not damaged.
• Verify that the proper amount of water is flowing through the filter. See
recommendation for proper water flow on the Technical Specs chart.
• Verify that filter media is not plugged with debris or needs cleaning.
Loss of water flow, check the following:
• Verify pump is not plugged with debris.
• Verify filter media is not plugged with debris.
• Verify filter is not leaking causing a loss of pressure.
Filter is leaking, check the following:
• Verify that the proper amount of water is flowing through the filter. See
recommendation for proper water flow on the Technical Specs chart.
• Verify O-rings are seated correctly.
• Verify filter canister has not been damaged.
MAINTAINING YOUR
SIMPLYCLEAR
™
FILTER:
15425 Chets Way | Armada, MI 48005
13
