ThePondguy 130040 Product Manual Download

Page: 7 / 16

MAINTAINING YOUR

SIMPLYCLEAR

™

FILTER:

WARNING:

Before performing any maintenance, always unplug the SimplyClear™ Filter from the

power source.

The amount of fish and waste in your pond will determine how frequently you will need to
clean your filter. In general, you will need to clean your filter throughout the season when
water flow is reduced.

Watch a video of the SimplyClear™ Filter maintenance online @

www.thepondguy.com/simplyclear

Tools Required:

•

#2 Phillips Screwdriver

•

Replacement UV Bulb

•

Soft, damp cloth

•

Descaler such as Pond Equipment Cleaner

•

Replacement quartz sleeve if yours is damaged or cracked

•

Replacement filter media pads

Unplug

Unplug your pump and filter.

Disconnect

Disconnect the outlet side of the filter and connect a
discharge hose.

MAINTAINING YOUR

SIMPLYCLEAR

™

FILTER:

15425 Chets Way | Armada, MI 48005

Summary of Contents for 130040

















Search results

Summary of Contents for 130040

Reviews:

Related manuals for 130040

Brands by name

Popular brands

ThePondguy 130040, Product Manual

Search results

Summary of Contents for 130040

Reviews:

Related manuals for 130040

Brands by name

Popular brands