ENGLISH
•
7
Place the humidifier on a flat, hard surface within reach
of an outlet. Ensure the unit is off and not plugged in
until ready to use.
1.
Remove the water tank, turn upside down and
unscrew the water tank cover.
2.
Fill the water tank with room temperature water
to approximately 1/4” from the opening.
3.
Replace the water tank cover and install the water
tank onto the humidifier base.
4.
Plug in the unit, shift the unit as desired to aim
the mist in the desired direction and turn the mist
adjustment knob to the desired level. The LED
light will illuminate indicating the unit is ON.
5.
The water tank will automatically fill the base, and
the mist action will start shortly.
6.
Adjust the level of mist as desired.
7.
When the water tank is empty, the humidifier will
stop automatically and the LED light will turn OFF.
Always turn the knob to MIN / completely OFF
before refilling or cleaning and storing.
INSTRUCTIONS FOR USE
NOTE:
Tap water quality
varies; it is suggested
that distilled or
purified water is used
in this humidifier.
Always use room
temperature water.
