TherAdapt
®
Winged Back Insert Options- Instructions
1. Flat Head Pads (WBI-100FH, WBI-200FH, WBI-300FH)
attach to the insert “wings” with hook fastener and can be used
to pad the head support.
2. Triangle Head Pads (WBI-100TH, WBI-200TH, WBI-300TH)
are
triangle shaped with the hook fastener on the long side of the pad.
Attach to the insert “wings” for maximum lateral head support.
3. Triangular Trunk Pads (WBI-100TT, WBI-200TT, WBI-300TT)
are triangle shaped with the hook fastener on the short edge for deeper
trunk support.
4. Protraction/Pelvic pads (WBI-100PP, WBI-200PP
,
WBI-300PP)
are angled at 25º and can be used at the scapula or the pelvis
to position and stabilize the user. They attach to the insert with
hook
fastener.
5. Back Liner Pads
are 2” high and 4” high (for WBI-100 use
BLP-102 and BLP-104
and for WBI-200 use
BLP-202 and
BLP-204
) or 3” high and 5” high (for WBI-300 use
BLP-303
and BLP-305
) cushioned pads that are used to line the center
of the insert. They attach with hook fastener anywhere along
the pre-installed loop fastener on the insert. The pads may be
used to line the entire insert or an area may be “left open” to
relieve pressure.
TherAdapt
®
Winged Back Insert (WBI-100/200/300) Instructions: Page 3 of 3
