EX-TRACK
®
Operator Manual, Revision T-1
69
SOFT LIMIT-: Software controlled limit in - direction. Maximal - lenght of the movement (cutting area
limitation). For activation SOFT LIMIT fuction go to CONTROL menu and set: SOFTWARE LIMITS
EF - „1“
9.8.4. OXY parameters
The flame parameters are accessed in the SETUP menu by pressing the [F3] key.
IGNITION: Initial ignition heigt in secs (time of movement of the torch from this height to touching
the plate).
PREHEAT TIME: Input a maximum preheat dwell period to suit the plate thickness prior to
introducing the cutting oxygen.
TORCHUP TIME (M70): It is a time of the torch movement up (in sec.) from the cutting height to
height for manual ignition of the flame.
TORCHDN TIME (M71): Is is a time of the torch movement down (in sec.) from TORCH UP height to
cutting height. After this action the preheat is running.
PIERCEUP HIGH (M72): Timer used to raise the torch at the start of the piercing process.
PIERCEDN HIGH (M73) Timer used to lower the torch at end of the piercing process.
PIERCE TIME: Time between actuating the cutting oxygen solenoid valve and starting the cutting
motion. A longer dwell period is required for thicker material (like piercing delay time in plasma
settings).
OVER CUT DELAY-TIME: Timed dwell period at the finish of a cut, cut oxygen pressure is reduced to
Summary of Contents for EX-TRACK
