en-us
Operating the appliance
12
Super cooling
Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
■
Before placing large quantities of food into the
compartment
■
For cooling drinks quickly
Note:
When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switch on super cooling:
1.
To open the menu for setting the temperature,
press
:
button.
2.
Press
/
button.
When super cooling is switched on, the symbol
/
appears on the display.
3.
Confirm the selection by pressing
8
button. If the
button is not pressed, the appliance stores the
setting and automatically returns to the main
screen after a few seconds.
Switch off super cooling:
1.
To open the menu for setting the temperature,
press
:
button.
2.
Press
>
button.
When super cooling is switched off, the symbol
/
disappears from the display.
3.
Confirm the selection by pressing
8
button. If the
button is not pressed, the appliance stores the
setting and automatically returns to the main
screen after a few seconds.
Clean lock
You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
"Cleaning the display" on page 18
1.
Press
"
button to open the
Settings
menu.
2.
Press
<
button.
The cleaning display appears, and the countdown
starts.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1.
Press
"
button to open the
Settings
menu.
2.
Use
(
button to move to the menu item
Appliance
settings
.
3.
Press
8
button.
4.
Press
)
button to move to the menu
item
Automatic clean lock
.
5.
To change the setting, press
:
button.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
■
Refrigerator compartment: +43° F (6° C)
■
Cool-fresh container: +35° F (2° C)
Switching Eco mode on or off
1.
Press the
"
button to open the
Settings
menu.
2.
Use
>
button to move to the menu item
Eco
mode
.
3.
Press
<
/
=
button.
The temperature is changed, and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note:
You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.
Self-test
This function can be used to start fault analysis on
your appliance.
"Appliance self-test" on page 21
Setting the brightness of the control panel
1.
Press
"
button to open the
Settings
menu.
2.
Use
(
button to move to the menu item
Appliance
settings
.
3.
Press
8
button.
4.
Press
:
button to open the menu
item
Brightness
.
5.
Press
(
)
buttons to set the required brightness.
6.
Press
8
button.
The setting is saved.
7.
Press
;
button to exit the menu.
