21
Menu 1 – Trending
A graphical representation of the core operating
parameters of the system is in the trending screen.
The trending screen displays the setpoint
temperature, evaporator fluid out, process supply
and return temperature, and optional hot gas bypass
valve resisters (if present) for easy analysis of the
system operation. Trending is always enabled and
always running.
System Trending Screen
Menu 2 – Full Screen
This screen provide a simple, large-font display of
the process supply temperature for users who are
primarily concerned only with this data point of the
system operation.
Menu 2 – Full Screen
Menu 2 – System Build
This menu allows configuration of the system. Use
this menu only with the assistances of someone from
the Customer Service Department.
CAUTION: The system configuration screen provides the
ability to restore the control system back to factory
defaults in the case that an unknown setting modification
occurred and the system now behaves unexpectedly. This
will shut down
all operation of the chiller.
Touching SYSTEM BUILD on MENU 2 provides the
ability to either review the existing factory build or
restore the configuration back to a known factory
state. Touch “YES” to enter the system configuration
screen.
WARNING: This will shut down all
operation of the chiller.
Review System Build Screen
