29
User Setup – Remote Setpoint
When the remote setpoint option is active, an
incoming 4-20mA or 0-10VDC signal controls the
setpoint of the master chiller. The signal will span
from the MINIMUM TEMPERATURE to the
MAXIMUM TEMPERATURE as defined in the
following figure.
Figure 60 - User Setup – Remote Setpoint Setup
Screen
User Setup – Primary / Secondary
Figure 61 - User Setup – Primary / Secondary Setup
Screen
User Setup – Chiller Capacity
Chiller Capacity Screen
This screen is necessary to adjust the nominal pipe
size where the flow sensor is inserted.
Figure 62 - User Setup – Chiller Capacity Setup
Screen
User Setup – Date/Time
Date/Time Screen
Date and Time is necessary for accurate data logging
as well as fault log time stamps. Touch the fields for
adjustment.
Figure 63 - User Setup – Date / Time Setup Screen
