This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either
Installation Guide
Parts List
To install the DP-D5 in your chassis,
placing a screw and washer that comes
with the DP-D5 on every screw hole that
matches the circles in below picture.
1
2
3
Distro Plate
A
x 1
LED
Y
-
Cable
B
x 1
Washer
C
x 8
Screw
D
x 8
G1/4 Stop Plug
E
x 3
Wrench
F
x 1
Controller
G
x 1
Power Cable
H
x 1
Controller Cable
I
x 1
Bridge Cable
J
x 1
MB SYNC Cable
K
x 1
Velcro
L
x 1
Circle 1 is designed for liquid outlet,
you may choose one of the ports to use.
Circle 2 is designed for liquid inlet,
you may choose one of the ports to use.
Circle 3 is designed for liquid fill,
you may choose one of the ports to use.
Circle 4 is the drain port.
Assembly example can refer to
the following figure.
4
To avoid air bubble
during liquid cooling
system working, please
fill the reservoir with
coolant to the line
(Normal coolant level)
5
Connect the LED Y-Cable onto
the Distro Plate.
Patented
16.8
Million Color
B
A
Pacific Core P5 DP-D5 Plus
1
1
4
1
2
2
3
105G
是
X
X
雙銅
單色
無
無
其他特殊處理效果
表面處理
2
厚度
(g/m )
折數
材質
雙面印刷
印刷色彩
單面印刷
規格樣式
單張
CHECK
DESIGN
藍 色 線 條 為 尺 寸 標 示 ， 請 勿印刷 上 去 ！
210 mm
297 mm
產品料 號
CL - W2 64-P L 00SW -A
Pa c if ic Co r e P5 D P -D 5 Plu s
說明書
1
9
/
1 0
/
1 4
A
產品名稱
印刷項目
發稿日期
版本
peipei
(19/10/14)
Aan
(19/10/14)
刀模 線
