-Tough Atomic Energy
Build for the Extreme-
ATX 12V 2.2 & EPS 12V 2.91 Version
ATX 12V 2.2
2.91 Version
& EPS 12V
Toughpower 850W Cable Management
Toughpower 850W Cable Management
-Tough Atomic Energy
Build for the Extreme-
09
08
Step
Step
Step
1
3.4 Power Supply Installation
1
1
2
3
2
After install the power supply unit into the chassis and then connect
the 20+4-pin main power cable to motherboard 20pin or 24 pin socket.
Step
Step
Step
2
Step
Step
Step
3
Connect the 4-pin/8-pin +12V auxiliary power connector to the
motherboard. (Users can use either 4 pins or 8 pins, depending on
the motherboard. Please check with the motherboard user's manual.)
Note:
Please check the below information before install your
Dual PCI-Express graphic cards.
The Toughpower 850W Cable Management Power Supply has four
PCI-Express connectors.
Two of the PCI-Express connectors comes out directly from the power
supply unit, the other two PCI-Express connectors are modularized
design.
For the below SLI and CrossFire dual graphic card mode, We suggest
you use one PCI-Express connector which comes out from the power
supply unit and one modularized PCI-Express connector for better
performance and stability.
For the Quad Graphic Card mode, We suggest you use two PCI-Express
connector which comes out from the power supply unit and two
modularized PCI-Express connector for best performance and stability.
NVIDIA SLI Card
ATI CrossFire Card
GeForce 7950 GTX
GeForce 7900 GT
GeForce 7800 GTX 512MB
GeForce 7800 GTX 256MB
GeForce 6800 Ultra
GeForce 6800 GT
GeForce 6800
Radeon X1950 series
Radeon X1900 series
Radeon X1800 series
Radeon X1650 series
Radeon X1600 series
Radeon X1300 series
*Please check Thermaltake website for installation instruction
on future graphic cards.
170 X 140 mm
