7
AF-KIT User Manual
USER MANUAL
UNPACKING/ASSEMBLY/OPERATION
Assembly (Continued)
8. Mount the solder wire spool onto the (4) Solder Spool Holder
●
Ensure that the solder wire is fed from the bottom of the solder wire spool
● Feed the solder wire into the
(3a) Guide Nozzle
● While pulling on the (3d) Release Lever, feed the solder wire through the
(3b) Tension
Adjustment Gear and (3h) Driver Gear and into the (3e) Solder Tube Nozzle
9. Switch the (2a) Power Switch to the “on” position. The auto feeder is now ready use.
Operation - Selecting the correct Nozzle Size
The nozzle (AF-NOZ-1) must be changed based on the solder wire diameter used as follows:
Solder Wire
Nozzle
Φ 0.5mm
Nozzle Φ0.5-0.6mm
Φ 0.6mm
Nozzle Φ0.5-0.6mm
Φ 0.8mm
Nozzle Φ0.8mm
Φ 1.0mm
Nozzle Φ1.0mm
Φ 1.2mm
Nozzle Φ1.2mm
For solder wire diameters not mentioned above please contact Thermaltronics or your supplier to
check for compatibility.
Correct way to feed solder wire
Wrong way to feed solder wire
Solder
Spool
Solder
Spool
(1) Press Release Lever
(2) Feed solder wire
Summary of Contents for AF-KIT
