Thermaltronics AF-KIT, User Manual

5

AF-KIT User Manual

USER MANUAL

UNPACKING/ASSEMBLY/OPERATION

Please read this manual and follow the directions before using the equipment. 

The carton contains:
1. Instruction manual

2. TMT-AF100 Auto Solder Feeder

3. AF-HPK-X

   1 

Guide Pipe Assembly

4. AF-HDL-1

2

 Hand Piece Holder

5. AF-NOZ-1 Nozzle Pack

6. AF-PEDAL-1 Auto Feeder Switch

7. AF-POWER-1 AC Power Adapter

1 

AF-HPK-1 for use on TMT-9000S, AF-HPK-2 for use on TMT-5000S, AF-HPK-3 for use on TMT-2000S

2 

AF-HDL-1 for use on TMT-9000S, AF-HDL-2 for use on TMT-5000S, AF-HDL-3 for use on TMT-2000S

Important: Keep all shipping materials until satisfactory operation has been verified.

Assembly

1. Remove TMT-AF100 auto solder feeder from its box and place on a suitable work bench. 

2. Remove the AF-HDL-X

2

 Hand Piece Holder from the box and attach to the right side of the TMT-

AF100 auto solder feeder.

3. Remove the AF-PEDAL-1 Auto Feeder Switch from the box. (See: Back Panel)

● 

Connect to the (2b) Switch Connection Port on the back panel of the auto solder feeder.

4. Remove the AF-POWER-1 AC Power Adapter from the box. (See: Back Panel)

● 

Connect the 3.5mm connector to the (2c) AC Power Adapter Inlet on the back of the auto 

solder feeder.

●

 Connect the power plug to the AC Power Outlet. 

5. Remove the AF-HPK-X

1

 Guide Pipe Assembly from the box.

● 

Insert the (3f) Solder Tube into the (3e) Solder Tube Nozzle. 

● S

ecure tightly by fastening the (3g) Locking Screw

6. Ensure the correct (4e) Nozzle is attached to the (4d) Guide Pipe. (See: Operation - Changing 

the Nozzle)

(2) Lock Solder Tube

(1) Insert Solder Tube