4. Before beginning any work on the electric installation, be sure that main breaker
panel switch is
OFF
to avoid any danger of electric shock, all mounting and
plumbing must be completed before proceeding with electrical hook-up.
Operation Instructions
1. Turn on the circuit breaker to bring electrical power to the unit.
2. Open water faucet for a few minutes until water flow is continuous and all air is
purged from water pipes. The unit must be operated after the breakers are
turned on.
3. After the unit is supplied with power, a beep sound can be heard and LED lights
for 2 seconds with no other display, the appliance will then enter standby mode.
4. Press “
” to turn the appliance ON or OFF. When the unit is ON, LED displays actual
water temperature of the outlet. If the unit stops operating for 30 seconds, the
screen will switch to the screen saver mode. This means that the display screen light
will be off, however the screen will light again if the panel is touched.
5. Press
and
to adjust the outlet temperature. Temperature setting range
is 30 - 55°C.
•
If the unit has been paused, you may initially get a short burst of very hot water
while you turn it on again. Please run the water through for a few seconds to let
the temperature settle down. Please check hot water with your hand before
taking a shower or using water on other parts of the body.
•
If the unit will not be used in winter, drain out water completely so that the
heater will not be frozen.
•
Please periodically clean inlet strainer and the shower to keep a free water flow.
6. Touch
and hold for 5 seconds to lock the operation panel. In the locked state,
the light of
will stay lit. Touch
and hold for 5 seconds to unlock the
operation panel, which will turn off the
light.
7. There is an automatic memory function to avoid repetitive operation, while you
turn on the appliance, the default set temperature will be the same as last time set.
PACKING
LIST
Excellence in Hot Water Technology.
10
ITEM
UNIT
QUANTITY
Electric Water Heater.
Unit
1
Rubber plug and screw.
Set
1
Operation and Installation instructions.
Copy
1
Shower accessories (option).
Set
4 for each.
Cable Clamp and Screw Sets.
Set
S1
2890/ElectricPackagingManuals/A5.indd 10
08/10/2018 10:56
