20
WARNING on high temperature surfaces
Avoid contact with parts and surfaces having high temperatures (working surfaces) which will be
hazardous for human such as:
1.
Boiler front door
2.
Fire door on the front section
3.
Water delivery and return lines (even if isolated), safety lines
4.
Flue spigot
5.
Connection between flue outlet and chimney
6.
Circulator pumps, expansion vessels
NOTICE
Flue gases
1.There could be a little gas release from the front side of the boiler, when the front loading door is opened.
Never breathe this gas flow.
2. When adding solid fuel when there is active fire bed inside the combustion chamber, protect your hands
and face..If needed wear protective gloves.
NOTICE
Firing fuel
1. Do not take the firing fuel out from the combustion chamber while it is still burning
2. Do not try to put the firing fuel off using water or any other liquids.
3. Do not leave the front doors and fire door open when there is fire inside the combustion chamber
4. To slow down or stop the fire, close air inlets, and flue outlets..
5. Your boiler can only be fired with the solid fuels whose characteristics have been given in Technical data
section. Never use any other solid fuel that would be harmfull for boiler section design, any liquid or
gaseous fuels.
