Mounting Brackets
4
Measure and locate the midpoints on each 14.25" side of the cutout.
The midpoints are where you’ll install the mounting brackets, each
mounting bracket will require 4–3/4" (included) wood screws.
WARNING: READ BEFORE PROCEEDING:
The HydroVive weighs 37 lbs. and overhead lifting is required to
continue installation. Please be cautious and practice ladder safety.
Connecting HydroVive
5
NOTE: Make sure electrical power is off to all ThermaSol devices prior
to making any connections.
Align the notches at the top of the mounting guides with the mounting
brackets and slip them over to firmly secure the HydroVive in place
while the connections are made. With HydroVive secured on the
mounting brackets, angle the unit to gain access and connect all
cables.
Double check to ensure that all connections are correct before moving
forward.
Connect both the M12 power/data cable from the
rainhead and the M12 cable from ThermaTouch
to the PDM
Plug the PDM into a standard 110VAC outlet, test
at the control that all functions are working prior to
moving forward.
Need Assistance?: Contact us at 800.776.0711
Connecting to Power Distribution Module (PDM)
6
Total Wellness Package
THERMASOL.COM
I
800.776.0711
16
16
