Complete Installation
9
Install the Screw Covers with O-Rings by hand.
Allow the silicone to dry for 24 hours before use.
Move Into Place
8
Guide the HydroVive into the ceiling and rest it on the highest
hook you can reach. Use the 3.5" included mounting screws, and
gradually insert them a little at a time to evenly lift the HydroVive into
position to create a seal with the previously applied silicone.
DO
NOT OVERTIGHTEN! Once the HydroVive is in position and the
silicone seal is created, no further clamping force is necessary.
Sealing HydroVive
7
Apply silicone along the groove on the back of HydroVive.
Total Wellness Package
THERMASOL.COM
I
800.776.0711
17