M 527428568201092016
THERMEX
HARWICH
49
Adjust the height of the stand and screw the
top part securely in place with eight screws.
Unscrew the four screws that hold the top part
of the stand in place.
Push the two parts of the duct down over the
stand on the hood.
4
5
6
Drill the holes and install rawl plugs intended
for the material into which they are installed.
Position the drilling template on the ceiling
where the hood is to be hung.
NOTE: The black arrow must be pointing in the
direction of where the front of the hood will be.
Install screws in the holes. Screw them in until
there is three millimetres of screw free.
NOTE: Avoid mounting a screw in the hole mar-
ked with a cross on the drilling template.
Tighten the three screws.
Push up the hood and rotate it into place on the
three screws.
Mount a screw in the last hole in order to lock
the hood securely to the ceiling.
10
11
12
EN
GL
IS
H
»
INS
TALL
ATION
x3
x1
x3
9
x4
7
8
Summary of Contents for HARWICH
Page 2: ......
