7
A suitable filter must be installed to the water inlet to the boiler, Figure 5.
Check that the maximum water mains pressure does not exceed 8 bars; if it does, a pressure
reducing valve must be installed.
Make sure that the gas category for which the boiler was designed corresponds to the category
available in the loca on where it will be used and the supplied gas pressure, as well as the gas
installa on, is in conformity with data plate.
Figure 5
Condensate
syphon hose
outlet
Central hea ng
flow connec on
Domes c hot
water outlet
connec on
Gas connec on
Domes c hot water
inlet connec on
Central hea ng return
connec on
9. DIMENSIONS OF THE BOILER
Dimensions of the boiler are given in Figure 6.
Figure 6a
24/28kW Side
Figure 6a
24/28/35 kW Front
Figure 6b
35 kW Side