1
1
11
1
2
2
3
2
3
3
4
6
5
6 5
4
4
7 8 9
10 8 9
REVERSIBILITY OF THE DOOR
Warning: To avoid accidents during the process of changing the door, we recommend that you get
assistance. The glass door is heavy and may cause injury if dropped.
-
Depending on to the model and the type of handle your wine cabinet is equipped with, you may have to
rotate the door through 180 degrees.
-
Depending on the type of handle your wine cabinet is equipped with, the door may not be reversible or
may require that a left or right opening door be ordered to change the opening side.
REMARK: WINEMEX69: The door could not reverse when the control panel install on the door.
WINEMEX20/WINEMEX40/WINEMEX69
/
WINEMEX145 will use same method to install the
door
1.
To put the cabinet on open operation place;
2.
The door opened to the maximum angle, take off the decorative nail on opposite side (Drawing 1);
3.To disassemble the pivot core of upper and lower door hinge by the inner six angle screwdriver
(Drawing 2);
4.
To suck out the door shaft core from the two ends of the top of the door by magnet (Drawing 3).
5.
Take away the door from cabinet after discharge the door core.
6.
Discharge the upper and lower door hinge by screwdriver (Drawing 4).
7.
To assemble the door on the opposite side with accessories in accessory bag.
1.Decorative nail
2.M4 six angle screwdriver
3.M4 door limit screw
4. Pincer
5.Door core
6. Slot type screwdriver
7. Upper door hinge
8.Lower door hinge
9. M5 six angle screwdriver
10.lower door hinge
11. Knife
Summary of Contents for Winemex Series
