TURNING ON YOUR WINE COOLER
Plug in and switch on the cooler by pressing on the power button
for a few seconds.
When you use the wine cooler for the first time (or restart the wine cooler after having it shut off for a
long time), there will be a few degrees variance between the temperature you have selected and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the
wine cooler is running for a few hours everything will stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before restarting
the unit. The wine cooler will not start if you attempt to restart before this time delay.
Operating Noises
To reach the desired temperature settings, Our wine coolers, like all wine coolers operating with
compressors and fans, may produce the following types of noises. These noises are normal and may occur
as follows:
-
Gurgling sound - caused by the refrigerant flowing through the appliance’s coils.
-
Cracking/popping sounds - resulting from the contraction and expansion of the refrigerant gas to
produce cold.
-
Fan operating sound - to circulate the air within the wine cooler.
An individual’s perception of noise is directly linked to the environment in which the wine cooler is
located, as well the specific type of models. Our wine coolers are in line with international standards for
such appliance. We will always do its utmost to satisfy its customers but will not retake possession of the
goods due to complaints based on normal operating noise occurrences.
TYPES OF REGULATION
Please note that depending on the loading and settings chosen it takes about 24 hours for the wine cooler
to see the temperature stabilizing.
During this time LED seems to move erratically in particular it is normal and this process occurs
whenever the setting is modified and/or whenever a large amount of bottles are added to the cooler.
Single temperature Maturing/Storage wine coolers:
WINEMEX20: Both built-in and free-standing type, sensor touch controller and LED displayer
WINEMEX24: Built-in type, sensor touch controller and LED displayer
Dual temperature Maturing/Storage wine coolers:
WINEMEX40: Both built-in and free-standing type, sensor touch controller and LED displayer
WINEMEX69: Free-standing type, sensor touch controller and LED displayer
Triple temperature:
WINEMEX145: Both built-in and free-standing type, sensor touch controller and LED displayer
Designed to store and mature all wines: red, white and sparkling. These wine coolers reproduce the ideal
conditions for wine storage, at a constant recommended temperature of 12ºC. They can also be set to
provide ideal serving temperature for full enjoyment of the wine’s qualities. Unless stated by the wine
maker on the bottle, We recommends 7ºC for your champagne, 12ºC for whites and 18ºC for reds. (Refer
to “Wine Service Temperature” recommendation chart)
Summary of Contents for Winemex Series
