DEFROSTING/CONDENSATION/ HYGROMETRY/ VENTILATION
Your wine cooler is designed with “Auto-cycle” defrost system. During “Off-cycle” the refrigerated
surfaces of the wine cooler defrost automatically. Defrost water from the wine cooler storage
compartment drains automatically and part of it goes into a drainage container, which is located at the
back of the wine cooler next to the compressor. The heat is transferred from the compressor and
evaporates any condensation that has collected in the pan. Part of the remaining water is collected within
the wine cooler for humidity purposes.
This system enables the creation of the correct humidity level inside your wine cooler required by the
natural cork to maintain a long lasting seal.
Notes:
The water collected by condensation, is therefore recycled. Under extremely dry environmental
conditions, you may have to add some water into the water container provided with your wine cooler
.
All units are equipped with a double glazed glass door that has a third internal acrylic layer to minimize
condensation on the glass door.
The wine cooler is not totally sealed; fresh air admission is permitted through the drainpipe. Air is
circulated through the cooler by means of a fan/fans and the hollow shelves.
Notes:
During the refrigerating cycle, heat is given off and disperses through the external surfaces of the
wine cooler. Avoid touching the surfaces during those cycles.
OPERATION ANOMALIES
Ensure that there is power to the electrical supply plug by connecting another electrical appliance to it.
Check fuse, if any. Make sure that the door is closed properly.
If your wine cooler appears to be malfunctioning, unplug it and contact your after sales service. Any
intervention on the cold circuit should be performed by a refrigeration technician who should carry out an
inspection of the circuit sealing system. Similarly, any intervention on the electrical circuit should be
performed by a qualified electrician.
Notes:
Any intervention performed by a non- authorized technician We will lead to the warranty being
considered as null and void.
POWER FAILURES
In the event of a power interruption, all previous temperature settings are automatically preservation and
it will revert to a preset temperature setting. (See preset chart)
Most power failures are corrected within a short period of time. An hour or two’s loss of power will not
affect wine cooler’s temperatures. To avoid sudden change of temperature while the power is off, you
should avoid opening the door. For longer period of power failure, do take steps to protect your wine.
Irrespective of the cause, if you notice either abnormal temperature or humidity levels inside your
wine cooler, be reassured that only long and frequent exposure to these abnormal conditions can
cause a detrimental effect on your wines.
Summary of Contents for Winemex Series
