ENGLISH
ITALIANO
780
856 Optional
852
227
254 Optional
390
5 - 10 mm
E
F
G
ø 8
EN
I
Eseguire un foro di diametro 65 mm. Inserire e adattare un tubo in
plastica
.
Drill a 65 mm diameter hole, insert a PVC pipe.
EN
I
DrillCollegamento tubi posteriore. Posizionare la dima, evidenziare i fori
da eseguire sulla parete, mettere a livello (FORI OPTIONAL).
Tubing connections from the rear. Place the fullscall diagram, mark the
holes to be made on the wall, check the horizontal position with the
level (OPTIONAL HOLES).
EN
I
Predisporre il fissaggio dell’unità.
Predispose the fixing of the unit.
EN
I
Collegamento tubi laterali. Tagliare l’angolo della copertura.
Tubing connections on right or left side. Cut a corner of the frame.
H
NO
NO
YES
Usando le viti, fissare l’unità al muro.
Make sure the panel is flush against the wall. Any space between the
wall and unit will cause noise and vibration.
Use the screws to fix the rear panel to the wall.
Make sure the panel is flush against the wall. Any space between the
wall and unit will cause noise and vibration.
EN
I
I
9