Thermo Dynamic water heater & central heating booster
www.elitetdch.com
ELITE TDCH Aug 2014v3 Page
9
of
26
Before Operating the System the following connections should be made.
REFER TO PAGE 8
1. Cold water feed to Item 12
2. Hot water feed Item 10
3. Pressure & temperature reducing valve to Item 16, this then connected to overflow
4. Heat exchange drip line connected down stream of P&T overflow( #3)
5. Central heating flow to Item 15
6. Central heating return to Item 17
7. Pump and timer installed in Central Heating outlet
8. Plug in unit
9. Plug in timer / pump
10. Check that compressor tray and drip line are free from debris
