Operating Instructions
45
The Language menu will appear as shown in Figure 29. Press
the + or - Keys to select the desired language. When the
desired language is shown press the YES Key to confirm the
choice.
Figure 29: + or -, then YES Key
The display will briefly show PROGRAMMING
LANGUAGE - PLEASE WAIT in the new language as shown
in Figure 30.
Figure 30: New Language
The new language is confirmed, and then the Standard Display
will appear in the new language as shown in Figure 31. The
unit is ready to run.
Figure 31: Standard Display, New Language
If Log Alarms are Present
Log Alarms are indicated for 60 seconds each time the unit is
turned on. This level of alarm serves as a notice to take
corrective action before a problem becomes severe.
Maintenance items such as maintenance hourmeter time-outs
are log alarms. The Temperature Watch screen is not disabled
if only log alarm(s) are active.
If log alarm(s) are present the Log Alarm notice shown in
Figure 32 will appear on the display for 60 seconds. The
remote indicator alarm light (if installed) will also be on during
this period. After 60 seconds the Standard Display will appear
