ES Series Lab Freezer
2
Safety Precautions
Thank you for purchasing this ES series cold storage equipment.
Before you first use this laboratory Freezer please carry out the following actions:
•
Check that the Freezer has not been damaged in any way during transportation.
•
If any damage is found it must be reported to your local dealer immediately.
•
Ensure all packaging has been removed, including cardboard, polystyrene and any tape used to hold
shelves in place for transportation.
•
The Freezer has been cleaned prior to dispatch; however, we advise that it should be cleaned using lukewarm
water containing a mild detergent and a soft cloth.
•
We recommend that the Freezer should be left in an upright position for 24 hours prior to switching on.
•
This equipment is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the equipment by a person responsible for their safety.
In this manual, the following symbols and conventions are used: -
This symbol when used alone indicates important operating instructions which reduce the risk of
injury or poor performance of the unit.
WARNING:
A situation which if not avoided, could result in serious injury or death.
CAUTION:
A situation which, if not avoided, may result in minor or moderate injury, impaired
performance, or damage to the equipment.
CAUTION:
Before installing, using or maintaining this product, please be sure to read this manual and
product warning labels carefully. Failure to follow these instructions may cause this product to
malfunction, which could result in injury or damage.
WARNING:
Potential danger of electric shock which, if not avoided, could result in serious injury or death.
WARNING:
These units are charged with hydrocarbon refrigerant. Only qualified service personnel
should service these units.
The snowflake symbol indicates extreme low temperatures and high risk of frostbite. Do not touch bare
metal or samples with unprotected body parts.
WARNING:
This symbol indicates a need to use gloves during the indicated procedures. If performing
decontamination procedures, use chemically resistant gloves. Use insulated gloves for handling
samples to avoid potential frostbite.
