4
Transporting and moving your ES series
Freezer
The freezer must always be moved in the vertical position. The cabinet must not be tilted
anymore than 10°. In the event that the cabinet is tilted more than 10°, the power supply must
not be connected until the equipment has stood upright for at least 24 hours.
Energy saving tips
This equipment is cooled by energy-efficient R600a refrigerant. To keep running costs as low as
possible always:
•
Position the equipment away from heat sources.
•
Make sure the air can circulate freely around the equipment, don’t block ventilation grid.
•
Ensure that products being stored are below room temperature upon entry.
•
Make sure the door is opened as little as possible whilst in use and closed as quickly as
possible to prevent unnecessary temperature fluctuations.
Important Information
The freezer contains environment-friendly, non ozone depleting refrigerant R600a. As R600a is
a flammable gas, it is important to avoid damage to the refrigeration circuit during transport and
installation. If the refrigeration circuit is damaged, avoid using a naked flame in the vicinity of
the freezer and connecting power to the freezer. Also make sure there is good ventilation in the
room. If you are in doubt please contact your supplier.
–
WARNING: Keep ventilation openings, in the equipment enclosure or in the built-in
structure, clear of obstruction.
–
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
–
WARNING: Do not damage the refrigerant circuit
–
WARNING: Do not use electrical equipments inside the food storage compartments of
the equipment, unless they are of the type recommended by the manufacturer.
Product Information
This freezer has been designed and built with the intention of the product being used within a
Laboratory and is designed to store contents between -12 and -20°C.
