Thermo Scientific
AerosolSense Manual
2-1
Chapter 2
Basic Operation
This chapter includes setting up the sampler, installing and removing the
sample cartridge, and result availability.
1.
Place the sampler on a flat surface 2 to 5 feet off the ground with the
inlet and exhaust unobstructed.
2.
Plug the power cord into an outlet with the appropriate voltage.
Equipment Damage
The AerosolSense Sampler is supplied with a three-
wire grounding cord. Under no circumstances should this grounding
system be defeated.
▲
3.
Toggle the power switch to the ON position.
4.
Sampler is ready for cartridge installation.
The AerosolSense Sampler can only use this specific sample cartridge:
Figure 2–1.
Sample Cartridge Parts
Setting up the
Sampler
Icon Here
Sample
Cartridge Parts
