Basic Operation
Testing Services
Thermo Scientific
AerosolSense Manual
2-7
The sample is ready to be sent to a lab for testing. See the following next
steps depending on whether you are using an on-site lab, a third-party lab,
or the Thermo Fisher Scientific testing services.
The sample is now ready to be processed using the steps in the
AerosolSense sample preparation procedure. To download the procedure,
visit the In-Air Pathogen Surveillance Solution support page at:
www.thermofisher.com/apssupport
The sample is now ready to be sent to your choice of a third-party testing
lab. Please advise your testing lab to follow the AerosolSense sample
preparation procedure in order to support testing protocol. To download
the procedure, visit the In-Air Pathogen Surveillance Solution support page
at:
www.thermofisher.com/apssupport
The following steps apply if the sample is being mailed to an external
partner laboratory as part of the testing service. The shipping material is
included.
1.
Assemble the box.
2.
Place the sealed biohazard safety bag that contains the sample cartridge
into the box and seal the box.
3.
Adhere the shipping label to the box and send it out for shipping.
Figure 2–12.
Required Packaging for Shipping
Testing Services
Self-Testing On-site
Lab
Third-Party Testing
Lab
Thermo Fisher
Scientific Testing
Services
