Introduction
Product Description
1-2
AerosolSense Manual
Thermo Scientific
The sampler collects air samples through an omnidirectional inlet. A
sample cartridge installed into the sampler contains the collection substrate.
The air sample is directed toward the collection substrate through an
accelerating slit impactor. Particles are trapped on the collection substrate
as the air is drawn through the sampler. After the sampling cycle, the
sample cartridge is removed, placed into a biohazard bag, and sent to a
laboratory for PCR testing. There are three laboratory testing options: (1)
self-testing at on-site lab, (2) third party lab testing, or (3) Thermo Fisher
Scientific testing services.
Figure 1–2.
Sampler LED Guide
Required Materials Not Included with the Device:
●
Personal Protective Equipment (PPE)
●
Applicable EPA-approved disinfectant
Warning
Use CDC standard precaution guidelines, including hand
hygiene and personal protective equipment (PPE) when handling the
sampler and sample cartridge.
▲
Equipment Damage
Do not attempt to lift the sampler with the inlet
cap.
▲
Product
Description
Icon Here
