Isotemp
Refrigerators and Refrigerator-Freezers
Operation | 5
•
Rotate the temperature control knob to the OFF
setting.
•
Disconnect the power cord from its outlet.
•
Remove contents of unit. If practical, wrap contents
in paper and then in a heavy blanket to maintain
temperature of items, especially those removed from
a freezer. Wear protective gloves to prevent frostbite
when handling cold items.
•
Open door and allow free circulation of ambient air.
•
To speed the process, place pan of warm water
inside the chamber.
•
Wipe out the interior.
•
Replace contents.
•
Reconnect power cord to outlet and set temperature
control to desired operating temperature.
How to Save Energy
•
Be sure to follow location suggestions as mentioned in
the previous INSTALLATION section.
•
Wipe moisture from glassware or other materials before
placing them in a unit.
•
Don't overcrowd the unit. Too many items can increase
electrical energy demand in order to keep everything
cool.
•
Close the door as soon as possible in hot, humid
weather.
•
Make certain that the door is closed tightly.
•
As soon as frost has accumulated to 1/4
"
, defrost.
•
Keep containers covered, when possible, to reduce
moisture buildup.
•
Set operating temperature no colder than necessary for
the items being refrigerated.
Safety Tips
Reversing the Front Door
(Model 05LREEFSA)
•
Remove bolts and plugs using a screwdriver.
•
Unscrew the bolts connecting the upper hinges to the
upper platform. Remove the upper platform by first
pulling it forward and then lifting it upward.
•
Remove the door by unscrewing the bolts in the upper
hinges.
•
Remove the buffer by unscrewing the bolts on both of its
sides.
•
Break off the part behind the buffer through which the
lower hinges pass using a knife or your hands.
•
Remove the lower hinge and mount it on the other side
tightening its bolts.
•
Remove the hole-plugs of the door handle with a knife.
•
Fit the hole-plugs of the door handle to the other side.
•
Fit the buffer to its place.
•
Mount the door to its place.
•
Fit the upper hinges into their places. Do not tighten the
bolts, but leave them loose.
•
Adjust the vertical and parallel position of the door by
eyesight then tighten the bolts of the upper hinges.
•
Fit the upper platform into its place.
•
Fit the bolts connecting the upper hinges and the upper
platform, but do not tighten them.
•
Adjust the upper platform until it is level then tighten the
bolts in operations.
•
Fit the plugs of the upper platform.
•
After a unit is in operation, do not touch the
cold surfaces, particularly when hands are
damp. Skin may adhere to the extremely cold
surfaces.
•
Never disconnect your unit by pulling on the
power cord. Always grip the plug securely
and pull straight out from the outlet.
•
Do not use a power cord that shows cracks
or abrasions. Have a qualified electrician
repair or replace damaged cords
immediately.