Thermo Scientific Robot Stainer Microm HMS 740
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Str. 1A
69190 Walldorf / Germany
387801 - English
53
PART 5 WORKING WITH THE
ROBOT STAINER HMS 740
5-1 PREPARATIONS
Before turning on the instrument, please note the
following:
Check that all stations, including exit stations
are covered with a cover.
Check if the liquid level in each station is
correct (max. filling height for staining
solutions must absolutely be observed!!!).
Turn on the water flow.
Close the hood.
Note:
For staining routine work, it is
recommended to fill the staining
solution until approx. 1 mm below the
filling height mark. Fill the wash solution until
approx. 1 mm above the mark.