14 | Getting Started
Smart-Vue Pro Duo / Quatro
User Guide
Getting Started
Prerequisites for Getting
Started
•
One or both of the following:
•
LoRaWAN-enabled receiver installed and setup for
web platform connectivity.
•
A smart-phone or tablet with bluetooth connectivity.
•
100-240 V AC power source and/or battery installed in
data logger.
•
Desktop or laptop with a supported web browser
application (see
Smart-Vue Pro web application user
documentation
for details).
Internet access to smart-vuepro.thermoscientific.com for
configuration
•
Smart-Vue Pro web account with at least one configured
user
Activating the Smart-Vue
Pro Duo/Quatro Data
Logger for LoRaWAN
This section assumes that your Smart-Vue Pro LoRaWAN
enabled receiver is up and running and within wireless range
of the Smart-Vue Pro Duo/Quatro data logger you are trying
to connect or that you have access to a carrier-operated
Smart-Vue Pro LoRaWAN network.
To activate your Smart-Vue Pro Duo/Quatro data logger and
enable it to communicate via the Smart-Vue Pro LoRaWAN
network and the web platform. Lithium batteries are provided
in the product box. Follow the steps:
1. Unscrew the screw behind the data logger.
2. Open the battery cover.
Figure 11. Removing the battery cover
3. Insert the provided batteries in the battery compartment,
ensure polarity is checked (see printed image inside the
compartment):
Figure 12. Ensure battery polarity indications
inside battery cavity
4. Replace the battery compartment cover.
5. Do not over tighten the screw while replacing the cover.
6. Stand by during the boot sequence.
7. Once the boot is complete, select your region (for
wireless use) and then setup, program and monitor your
Smart-Vue Pro Duo/Quatro data logger as described in
the Smart-Vue Pro web application documentation.
Remove the screw
on the battery
compartment door
Follow the “+” and
“-” signs indicated
for batteries
