42 | Maintaining your Data Loggers
Smart-Vue Pro Duo / Quatro
User Guide
•
With the first new battery firmly in place, remove and
replace the second used battery.
Figure 61. Replace one battery after the other
(and/or keep AC power on)
4. Clip the battery compartment cover back onto the unit
and replace the screw being careful not to over-tighten it.
5. Wait during the boot sequence.
Cleaning Instructions
You may occasionally need to clean your Smart-Vue Pro
Duo/Quatro data loggers depending on conditions at your
site.
Here are some recommendations and guidelines for cleaning
your data loggers:
1. Clean the data logger using a soft cloth lightly moistened
with water, a detergent or isopropanol alcohol.
2. Do not use any aggressive cleaning agents or scratching
cleansers that might damage your data logger.
3. Do not submerse the data logger in any liquid, as the
casing is not waterproof.
CAUTION:
If you remove both batteries
simultaneously, the data logger will shut down
and data logging currently in progress will be
stopped (readings in memory are not lost).
CAUTION:
After replacing batteries, the battery
counter must be reset to recognize the new
battery status. See
Pro Duo/Quatro Battery Counter
