General Purpose Refrigerator and Freezers
Transport and Handling | 9
Shelves Installation
Position the shelf supports on the rack at the desired
position, inserting them into the special slots and turning
them of 90° to block them. At this point, insert shelves.
Figure 4. Shelves Installation
Placing Material Inside the
Compartment
Care must be taken when loading material, to avoid
malfunctions and allow air flow to ensure temperature
uniformity inside the refrigerated compartment.
Observe the following instructions:
•
Do not place material over the label indicating the
maximum permitted loading level, if present.
•
Store material leaving a distance of at least 6 cm from
sides and at least 18 cm from the top of the
compartment
Figure 5. Max. level label
Figure 6. Correct Material Storage
Figure 7. Incorrect Material Storage
•
Do not position material in contact with or near the
temperature probes
Figure 8. Probes Position
•
Do not block air vents.
Figure 9. Air Vents at the Top of the Compartment
Indication of Optimal Use
The following instructions are provided to the user to
follow in order to get the best equipment performances:
Shelf Slot
YES
