General Purpose Refrigerator and Freezers
General Information | 3
General Information
Certification
All refrigerated cabinets are built in accordance with the
relevant European Directives applicable at the time of
release in the market.
The Refrigerated cabinets are certified in accordance
with Directives 2006/42/EC, 2014/30/EC, 2014/35/EC
and subsequent integrations, built according to the
safety requirements for electrical appliances for use in
the laboratory (CEI EN 61010-1).
Testing
The machine is tested at our factory in accordance with
current regulations and it is shipped ready to use.
Purpose, Content and
Recipients of the Manual
This manual has been drafted for the purpose of
providing all the instructions necessary for correct use
of the machine and for maintaining it in perfect
condition, in particular with regard to the user's safety.
The following professional figures shall be defined in
order to identify tasks and responsibilities:
Installer:
Qualified technician who performs machine
placement and commissioning in accordance with the
instructions in this manual.
User:
Person who, after carefully reading this manual,
uses the machine for his own permitted uses. It is
mandatory for the user to read the manual carefully and
make reference to it.
Routine maintenance worker:
Qualified technician able
to carry out routine maintenance on the machine,
following the instructions in this manual.
Special maintenance worker:
Qualified technician
authorized by the manufacturer, able to carry out special
maintenance on the machine.
The manufacturer declines any responsibility for
improper or unreasonable use of the machine and for all
those operations carried out on the same ignoring the
instructions in this manual.
The manual must be kept in an accessible location
known to all operators (installers, users, routine and
special maintenance workers).
No part of this manual may be reproduced and/or
disclosed by any means and in any form whatsoever.
Arrangements Prepared by
the Customer
The following arrangements are set by the customer:
-
The machine electrical connection
-
Installation site arrangement
-
Routine maintenance
-
Refrigerator cleaning and the products used for it
Requests for Technical
Support
Provide all the information required regarding operation
of the device being tested in order to request technical
support from ThermoFisher Scientific.
For this purpose, send the table in
Annex 1, “
1. User Data for Technical Support Request
”
filled.
If your request arrives from an affiliated service center,
you must also provide Annex 2, “
Technical support on Controller
”
For more information refer “
”
section.
