17
Feedwater Requirements
Minimum Pressure @ 77 °F
w/new Prefilter
30 psig (2.11
kg/cm2)
Maximum Pressure
100 psig (7 kg/cm2)
Maximum Flowrate
D6828 membrane
9.8 lpm (2.6 gpm)
D6829 membrane
9.5 lpm (2.5 gpm)
D68210 membrane
13.3 lpm (3.5 gpm)
D68211 membrane
13.3 lpm (3.5 gpm)
Temperature Range ( 1 )
D6828 membrane
1.7-35°C (35-95°F)
D6829 membrane
1.7-35°C (35-95°F)
D68210 membrane
1.7-35°C (35-95°F)
D68211 membrane
1.7-35°C (35-95°F)
pH Range (1) (2)
D6828 membrane
4-8
D6829 membrane
4-8
D68210 membrane
4-11
D68211 membrane
4-11
Residual Chlorine
D6828 membrane
0.3-1.0 ppm
D6829 membrane
0.3-1.0 ppm
D68210 membrane
zero
D68211 membrane
zero
Turbidity
< 1.0 NTU
Total Iron
<0.5 mg/1 as Fe
Langlier Saturation
Index
Negative
Silt Density Index
<5%
Max. TDS @10%
Recovery
D6828 membrane
910 ppm
D6829 membrane
not recommended
D68210 membrane
not recommended
D68211 membrane
not recommended
Max. TDS @20%
Recovery
D6828 membrane
820 ppm
D6829 membrane
832 ppm
D68210 membrane
816 ppm
D68211 membrane
816 ppm
Max. TDS @30%
Recovery
D6828 membrane
731 ppm
D6829 membrane
749 ppm
D68210 membrane
724 ppm
D68211 membrane
724 ppm
Max. TDS @40%
Recovery
D6828 membrane
643 ppm
D6829 membrane
667 ppm
D68210 membrane
634 ppm
D68211 membrane
634 ppm
Max. TDS @50%
Recovery
D6828 membrane
557 ppm
D6829 membrane
591 ppm
D68210 membrane
545 ppm
D68211 membrane
545 ppm
Product Water
Flowrate (1)
D6828 membrane
58.4 Iph ±9 Iph (15.5 gph ±2.4gph)
D6829 membrane
110.4 Iph ±10 Iph (29.2 gph ±2.6 gph)
D68210 membrane
157.7 Iph ±24 Iph (41.6 gph ±6.4 gph)
D68211 membrane
78.9 Iph ±12 Iph (20.8 gph ±3.2 gph)
Quality (1)
NaCI
System Rejection
@10% Recovery
D6828 membrane
51 ppm
94%
D6829 membrane
NA
D68210 membrane
NA
D68211 membrane
NA
@20% Recovery
D6828 membrane
55 ppm
93%
D6829 membrane
86 ppm
89%
D68210 membrane
44 ppm
94%
D68211 membrane
44 ppm
94%
@30% Recovery
D6828 membrane
59 ppm
92%
D6829 membrane
93 ppm
88%
D68210 membrane
47 ppm
93%
D68211 membrane
47 ppm
93%
@40% Recovery
D6828 membrane
65 ppm
89%
D6829 membrane
101 ppm
84%
D68210 membrane
52 ppm
91%
D68211 membrane
52 ppm
91%
@50% Recovery
D6828 membrane
73 ppm
87%
D6829 membrane
114 ppm
80%
D68210 membrane
58 ppm
89%
D68211 membrane
58 ppm
89%
(1) Membrane performance is dependant on membrane condition, pressure, recovery,
water temperature and water composition. Listed membrane performance for a new
membrane is based on optimal operating conditions of 200 psig, 10% recovery, 25°C
(77°F) feedwater temperature and feedwater composition of 1000 ppm NaCl at a pH of
6.0-6.5.
(2) pH range is for membrane only. Minimum pH for the ULTROpure unit is 6.0.
Equipment Specifications
Summary of Contents for ULTROpure 682 Series
