Warnings and Notices
Important: READ THESE NOTICES BEFORE INSTALLING THE UNIT
General Notices
AS A ROUTINE LABORATORY PRECAUTION, ALWAYS WEAR SAFETY GLASSES WHEN
WORKING WITH THIS APPARATUS.
INSTALLATION SHOULD BE COMPLETED BY QUALIFIED PERSONNEL ONLY.
WITHIN THE MECHANICAL CONVECTION CABINETS, OBJECTS SHOULD NOT BE
PLACED ON THE SHELVES IN SUCH A MANNER TO BLOCK THE MOVEMENT OF
HEATED AIR INTO THE CHAMBER.
Electrical Warnings
FOR PERSONAL SAFETY, THIS APPARATUS MUST BE PROPERLY GROUNDED.
BE SURE THAT THE POWER SUPPLY IS OF THE SAME VOLTAGE AS SPECIFIED ON
THE NAMEPLATE.
DANGEROUS VOLTAGES EXIST WITHIN THIS UNIT. SERVICE SHOULD BE PERFORMED
ONLY BY QUALIFIED PERSONNEL. DISCONNECT THE UNIT FROM ITS ELECTRICAL
SOURCE. REMOVE THE SHELVES AND THERMOMETER IF INSTALLED.
DISCONNECTING ANY COMPONENT FROM THE CIRCUIT WITHOUT PRIOR REMOVAL
OF THE POWER SOURCE MAY CAUSE DAMAGE TO OTHER CIRCUIT COMPONENTS.
DO NOT CRIMP OR SHARPLY BEND CAPILLARIES. PROVIDE ADEQUATE CLEARANCE
BETWEEN CAPILLARY AND HEATER COILS TO PREVENT ELECTRICAL SHORT.
DISCONNECT OVEN FROM ITS POWER SOURCE BEFORE SERVICING.
