Orion 900A Printer Instruction Manual
The Battery
5
Chapter IV
The Battery
RECHARGING THE BATTERY
The Orion 900A contains a rechargeable battery. The printer can operate
while plugged into line power and recharging. Recharge the battery
overnight so it is ready for use the next day as follows:
1. Plug the line converter into the jack on the right side of the printer.
For printers used with bench top meters turn meter over and plug into
jack from below. You may leave the printer plugged into line power
indefinitely.
2. Plug the line converter into an appropriate wall outlet and turn
the printer off. Leave in this state for 12 hours to fully recharge
the battery.
Note
: Plugging in the meter will not recharge the printer battery. The printer
must be plugged into line power directly.
