14
40.020.927 - rev. 07 - 2016
IMAC 2000 S
ENGLISH
14
40.20.927 - rev. 06 - 2011
IMAC 2000 S
English
English
Contents
Safety instructions.............................................14
Introduction .......................................................15
Preparations......................................................16
Operation ..........................................................17
Maintenance......................................................18
Troubleshooting ................................................19
Reserveonderdelen...........................................12
Technical information ........................................21
Installation of accessories.................................22
EC Declaration of conformity ............................22
Preface
This manual contains the instructions for use of
the convector heater shown on the cover. The
information in this manual is important for the
correct and safe operation of the convector
heater.
Identification of the product (Fig. 1)
The identification plate is mounted on the side of
the convector heater. The identification plate
contains the following information:
A Type of machine
B Production code
C Type of fuel
D Air output
E Net capacity (Hi)
F
Voltage / frequency
G Current
H Fuel consumption
I
Year of manufacture
J
Serial number
Service and technical support
For information about the convector heater,
please contact your dealer of the manufacturer.
Make sure you have the following information at
hand: type and serial number of the convector
heater.
Warranty and liability
For warranty and liability, please refer to the
general warranty conditions.
Environment
1
SAFETY INSTRUCTIONS
1.1
Pictograms used in the manual
1.2
Lifting instructions (Fig. 2)
A Lifting hooks
B Shafts for lifting using a fork-lift truck
To find out the weight of the convector heater,
refer to table C in the Appendix at the back of this
manual.
1.3
Icons on the burner (Fig. 3)
A Air quantity setting
B Transport screws
C Data burner automat
D Electrical connection
E Technical data ventilator
F
Technical data burner
Note
The heater is made of various metals
and synthetic materials. The heater also
contains electronic parts, which must be
treated as electronic waste. Please
contact your dealer for further
information.
Only applicable to the European
Union
Waste disposal of electric &
electronic equipment for business
use.
For further information regarding the
disposal of products for business use at
the end of their life span, please contact
your dealer or distributor in your country.
This product may not be disposed of
together with commercial waste or as
commercial waste.
Caution
Points to risk of damage to the
equipment.
Warning
Points to a dangerous situation, which
may result in death or serious injury.
Warning
Always switch off the power supply
before carrying out any maintenance of
repair work to the convector heater!
Hot
Some surfaces may be hot! Wait until
these parts have cooled down before
carrying out any maintenance.
Suggestions and tips to facilitate the
necessary tasks or actions.
Warning
Do not use any unsuitable material for
lifting the convector heater.
