22
40.020.927 - rev. 07 - 2016
IMAC 2000 S
ENGLISH
22
40.20.927 - rev. 06 - 2011
IMAC 2000 S
English
9
INSTALLATION OF ACCESSORIES
9.1
Flue (Fig. 4)
The convector heater has a flue connection.
1. Slide a flue (B) over the connection (C).
2. Place a rain cover (A) on the end of the flue.
9.2
Diameter of the flue
/i
9.3
Air hose
Hoses may be connected to the exhaust opening
of the convector heater to convey hot air
elsewhere.
Contact your dealer for information about the
maximum resistance and the diameters of the
exhaust hoses, bends, manifolds and hose
clamps.
9.4
Diameters of exhaust hoses
/i
9.5
Room thermostat
Refer to the instructions of the thermostat.
10
EC DECLARATION OF CONFORMITY
For the EC declaration of conformity, go to
www.thermobile.nl.
Caution
The flue should point upward. Do not let
the flue point sideways. An angle of 45°
is acceptable; the length of the flue
should be at least 1000 mm.
Flue (external)
IMAC 2000 S
Diameter
200 mm
Caution
Check the temperature resistance of the
hose used.
Outlet
IMAC 2000 S
Diameter
600 mm
