MULTIFUNCTIONAL UNITS RLC – Installation and maintenance manual
MUMRLCHEAT_REV01_1012_UK
Pag. 4 di 31
1. Generalità
1. OVERVIEW
1.1
Summary of guarantee regulations
A. The guarantee for Thermocold machines is 12 months from the date the machine is operated for the first time but no more than 18
months from the date of the invoice. The warranty is reduced to 6 months from the start up date for units running continuously, that is
more than 12 hours a day. The date the machine is operated for the first time means the date reported in the “1st start up form”
contained into the “machine log book”. This form should be filled in and sent, within 8 days from the start up, to Thermocold.
B. The guarantee is valid if all the installation regulations have been adhered to (both those which may have come from Thermocold and
those coming from current practice), if the “1st start up form” has been filled in and sent to the Thermocold after sales department.
C. The guarantee is subject to any faults or defects being reported within eight days from their discovery. The guarantee will only be
applied if and when the purchaser suspends use of the equipment as soon as a defect has been found.
C1. Replacement items are to be considered always ex THERMOCOLD factory. Labour costs to replace failed items either under warranty
or not, will be not of THERMOCOLD care.
D. The guarantee is valid if the first running of the machine is carried out by a Thermocold authorised assistance centre.
E. The guarantee is subject to regular maintenance of the unit which is appropriately indicated in the “machine log book” located inside
the electrical panel.
F. Warranty is automatically over in case of payments not fulfilled, non-performance of the contract and even if the units show tampering
without THERMOCOLD writing approvals.
G. Non observance of the above mentioned rules and of all the indications written on this manual, will cause the immediate loss of
warranty, getting free THERMOCOLD from any responsibility for the unit and any damages to persons or things
.
2
Receiving the unit
On receiving the unit it is up to the customer to check that there is no obvious damage or pieces missing. If this is so, an immediate
complaint must be made to the carrier for damage or for not-delivery and the Receiving Card to be found inside the unit electrical panel
must be filled in. Photographic evidence must be provided for macroscopic damage. The card must be sent to Thermocold within 8 days of
receiving the goods: if it is not sent back or delayed, the complaint will not be accepted.
The unit is identified by:
Packaging label: it contains the identification data of the product.
Thecnical label: it contains the technical and performance data of the unit.
In case of loss, ask for a copy to the After Sales department.
If the identification of the product is not sure because of the damaging, removal, lack of the identification labels, the installation and
mainteinance operations become difficult.
2.1
Preliminary notions
Operate in respect of the safety regulation.
About the dimensional data of the unit and the technical data, see the chapter “Technical information”.
For loading and unloading the unit use the necessary personal protective equipment .
2.2
Delivery checks
Before the delivery:
Check the packaging and the unit have not defect caused by carriage.
Check the delivered materials correspond to the good declared in the packing list.
