MULTIFUNCTIONAL UNITS RLC – Installation and maintenance manual
MUMRLCHEAT_REV01_1012_UK
Pag. 7 di 31
3
Positioning
3.1
Installation servicing space
Respect the instructions in the dimensional drawing provided on board. Narrow installations spaces may cause:
Noise level increase
Not correct heat exchange and unit ventilation.
Maintenance difficulties or impossibility.
3.2
Condensate
The unit in order to easily discharge the condensate caused by the heat pump operation, especially during the defrosting cycle. Avoid the
condensate drain in location where people transit.
3.3
Anti-vibrantion
L’unità esterna va ancorata su antivibranti in gomma o a molla che vanno fissati nel seguente modo:
Firmly fasten the anti-vibration bottom
part to the support base plate of the unit.
Screw the fastening nut and the lock nut
to adjust the correct inclination of the unit.
The incorrect positioning of the unit can
cause damage of the compressor because
of the incorrect oil leveling.
4
Safety regulations
4.1
Preamble
All Thermocold units are designed, built and inspected in compliance with the European Community Directives n° 98/37/CE (three phase
power supply), EN 60335 Part 1 and 2 , low voltage directive 73/23CEE, electromagnetic compatibility directive EMC 89/336CEE, Pressure
Equipment Directive 97/23/CEE. Before using the machine read carefully the recommendations reported in the following manual.
