UM-0090-B1E
DT90 Range User Manual
Page 6
RG
Part A
– The DT90
Figure 1: dataTaker DT90N (left); DT90L (right)
DT90 Concepts
What is the DT90?
The DT90L and DT90N dataloggers, are compact all-in-one monitoring modules, designed specifically for remote
measurements, where emphasis is on low power, small size and ease of deployment. Having an analogue 16-bit channel
resolution and digital counters with SDI-12 / MODBUS RTU support it makes it possible to connect various sensors in the
field with minimum time.
Simple connectivity via USB on-site makes it easy to configure and test the deployed monitoring module. Remote
configuration gives the possibility to tune the system to arising needs. Variable sampling and transmission schedules are
possible to set up. The whole design is made to keep it small, simple and effective, meaning; low maintenance, long
uninterrupted working time and money saved!
The DT90 Product Family
The DT90 product family includes the following models:
The
DT90L
is a low cost, low power Compact variant of data logger
The
DT90N
is a Nano variant which is smaller model of DT90
DT90-Friendly Software
DT90 Configuration
is a desktop based application for programming and monitoring DT90 Series data loggers. This
Config
software requires installation in your PC. It provides a totally simple interface to create and set channels, each
channel can have different reading rate.
DT90 Configuration
has inbuilt chart to view historic data values and download data. It also possible to trigger
instantaneous measurement.
All software is provided on the CD supplied with your DT90, and updates are available from the dataTaker website,
About This Manual
This manual is intended for all users of the DT90. It describes:
How to connect sensors and other devices to the DT90's input and output channels.
How to program the DT90 to collect and return data as required.
How to manage the data that the DT90 collects.
