21
equipment is under warranty, it is automatically invalided.
Follow the use and maintenance instructions indicated at this manual.
Always remove the plug from the stock when it is not in use.
If the power cord or the stock is damaged, they shall be exchanged by the
manufacturer or authorized technical support.
OPERATIONS/ PAINEL CONTROL LEDS
On/ Off :
Press the bottom once to turn on and turn off the equipment.
Full Reservoir :
Remove and empty the water reservoir.
Defrost/ Energy Light :
The defrost light shine fast when the ambient
temperature is lower than 17°C, the compressor turns off for a determined time to
defrost the condenser. Just the fan keeps working to force the system defrost.
The power light keeps on when the equipment is turned on and in the event of a
power failure, it and all other lights will be erased.
UR
:
When the equipment started, the humidity control button must be pressed
to select U.R level. For each selection, 5% of humidity will be incremented. CO
(Continuous)-30%-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-CO
We recommend maintaining the U.R at 50%.
As soon as the dehumidifier reaches the U.R selected, it will stop the
dehumidification and maintain working only the ventilation. If the humidity level starts
to grow, the equipment will come back to work normally. Options between 50% and
60% of U.R are the ideal to ensure human comfort. Above this, microorganisms to
health start to reproduce quickly.
Dehumidification Potency :
Press the dehumidification potency button to high or
low mode. Press again during three seconds to activate the lock mode of the other
functions, and make it again to unlock the function.
Turbo Mode :
In turbo mode, the unit will operate at high dehumidification power
and will shut down after six hours of continuous operation.
Timer
:
Adjusts the equipment to turn off within the selected time within 24 hours.
Note: Press the button for 2 seconds to cancel the auto off time
.
ATENTTION
Never use your equipment in the power supply cord, the socket or
control panel is damage. Never tie the power supply cord or allow it to
come in contact with sharp edges.
Failure to follow the instructions will void the instructions.
