Installation, use and maintenance guide
ARDHEA EVO5
– ARDHEA-F EVO5
Page
18
ENG
6.4 MOUNTING THE CERAMIC CASING
To install the ceramics, proceed as follows:
1)
Extract the ceramics from their packaging
taking extra care
as they are particularly fragile.
2)
Remove the cover
D
by unscrewing the screws
C
-
C1
-
C2
(figure 1).
3)
Undo screw
B
and remove the cast iron cover
E
(figure 1), screw in screw
B1
(supplied) in the hole freed by screw
B
.
4)
Undo screws
P
and remove the ceramic supports
O
(figure 2).
5)
Undo the 4 screws
R
and remove the support
Q
(figure 2).
6)
Fasten the ceramic
H
to support
Q
by bending the 4 wings as indicated in Detail
S
and fasten it once again with the screws
(R) removed earlier (figure 3).
7)
Next, fasten the previously removed ceramic supports
O
with screws
P
.
8)
Then fasten ceramics
G , H , I , L
. To firmly fasten the ceramics to the product, bend the "wings" (4 for each ceramic),
before inserting the ceramic as shown in Detail
N
and Detail
M
(for heater mod. ARDHEA-F EVO5 follow the indications in
Figure 4, for heater mod. ARDHEA EVO5 follow the indications in Figure 5).
9)
Next, place the cast iron cover
E
and raise or lower it by means of the screws
F
(figure 1).
10)
Mount cover
D
once again using screws
C, C1, C2
and install ceramic
A.
LEGENDA
KEY
FIGURA
FIGURE
Dettaglio S, N, M
Detail S, N, M
FIGURE 1
FIGURE 2
FIGURE 3