THERMOROSSI ECOTHERM 5000 Installation, Use And Maintenance Manual Download

Page: 11 / 28

pg. 11

A practical infrared remote control is supplied with the heater: press the left button to adjust the ventilation level, press the right button to
adjust the combustion level. If the heater is supplied with a white radio control (optional) the infrared control only works when the MANUAL
setting is set on the white handheld radio control.

6.3 INFRARED REMO

6.3 INFRARED REMOTE CONTR

TE CONTR

TE CONTRO L

O L

INTRODUCTION

The handheld radio control is the device that allows you to control Ecotherm in order to optimise consumption and its functions. Keep in mind
that radio wave transmissions can be affected by the surrounding environment: the presence of thick walls can reduce the transmission that
normally extends to 6-7 metres.

6 . 4

OPERA

OPERATION OF

TION OF

TION OF THE

THE

THE WHITE HANDHELD RADIO CONTR

WHITE HANDHELD RADIO CONTR

WHITE HANDHELD RADIO CONTROL (OPTION

OL (OPTION

OL (OPTION AL)

AL)

6 . 4 . 1

Indicators of the handheld radio control

(1) Flame adjustment button
(2) Ventilation adjustment button
(3) (4) Auxiliary keys.
(5) “Room temperature detected by the radio control's sensor” indicator .
(6) "Ventilation" indicator.
(7) " Combustion" indicator.
(8) “ Room temperature setting" indicator : this is the room temperature that you

wish to reach by means of buttons 3 and 4.

(9) Area of the display where the operating program is displayed.
(10) Battery charge level
(11) Switch 0-1 radio control power
(12) Battery charger connection.
(13) Code selector and Batteries compartment cover

The Thermocomfort radio control can be used with 4 different operating programs:

- Manual (MANUAL appears in area (9) of the display).

- Automatic 5 (AUTO 5 appears in area (9) of the display).

- Automatic 3 (AUTO 3 appears in area (9) of the display) .

- Economy (ECONOMY appears in area (9) of the display).

To change the operating program turn the switch (11) to "1". Press and hold down button (3) until the set program begins to blink on the
display (9). Now release button (3) and press button (3) and/or (4) repeatedly until you select the desired operating program.

Caution:

to guarantee optimal data transmission it is advisable to always place the radio control in its support in a vertical
position.

The following operations must be carried out the first time the heater is started up :
- Turn the switch (11) to ON (see drawing below)
- Connect the radio control by means of the battery charger supplied to the power line, ( it must be recharged for
at least 5 days); as the rechargeable batteries could be partially or completely flat). Leave the radio control
connected at all times, by means of the battery charger, to the power supply line.
The heater must be energised and the switch turned to position "1".
At the end of the winter season it is mandatory to switch off the radio control completely, by means of the switch
situated inside the battery compartment, in order to preserve the life of the batteries. The batteries are
guaranteed for 6 months. When the batteries are exhausted dispose of them safely. It is normal for the tempera-
ture sensor to detect temperatures which are slightly different to the real ones: variations caused by the
environment in which the radio control is positioned.

MANUAL program
In the MANUAL program the room temperature thermostat is disabled. Press button (1) and the flame symbol begins to blink. Press button (3)
to decrease the combustion level

by lighting up the bars sequentially

, vice versa press button (4) to increase the combustion level. The

combustion level changes with each press of buttons (3) and (4).
Press button (2) and the ventilation symbol blinks. Press button (3) and the combustion level decreases,
vice versa press button (4) to increase the combustion level. The ventilation level changes with each press of buttons (3) and (4) . Caution:
it is possible that, due to radio interference

or sending commands too close together, the changes will not be implemented

. With this program

you can also use the infrared control supplied. It is normal that in the manual cycle the ventilation is often set at the maximum speed in order
to cool the heater body more effectively.