pg. XVII
(1) Insert on/off and flame adjustment button . When you press this button the appliance (7) switches to START / OFF. Press
repeatedly to activate up to 5 bars and the AUTO indicator is activated (automatic).
START - start up phase: during this phase (lasts approx. 20 minutes ) the appliance is self-adjusted independently from the settings.
OFF - shut down phase. As soon as the OFF symbol appears the smoke suction unit operates for a certain amount of time before
placing the heater / boiler in stand-by mode.
The circulator pump begins operating as soon as the temperature in the boiler reaches 61°C.(symbol
displayed)
The other boiler operating statuses appear in the display, that is, WORK..... STOP..... WAIT ON.... SUN OUT (para. 5.10)
(2) Button for setting water temperature in boiler. Press this button to set the temperature for the appliance to reach; The setting
range is between 65 °C and 73°C. This value is displayed in the area of the display next to the drop symbol. Press this button
repeatedly and the following numbers will appear on the display (7) 65 ..... 66 ................ 73 ....... 65. The temperature
detected by the thermocouple in the boiler is indicated after the symbol .
(3) (4) Auxiliary buttons for setting values (only useable within the Menus).
Press button (3) to lower the value. Press button (4) to raise the preset value.
(5) Programming Enable / Disable keys. Press this button to activate/deactivate the programming (presence/absence of the symbol on
the display (7)).
(6) “MENU” selection button To access the main menu press the indicated button. Press button 6 repeatedly to scroll the adjustment,
setting and programming windows (see next paragraphs). To return to the operating status simply continue to press the button (6)
repeatedly.
5
5
5
5
5
USE OF
USE OF
USE OF
USE OF
USE OF THE HEA
THE HEA
THE HEA
THE HEA
THE HEATER / BOILER
TER / BOILER
TER / BOILER
TER / BOILER
TER / BOILER
The appliance, when operating, is hot to the touch and the glass in particular is extremely hot: take care not to touch hot parts.
5 . 1
5 . 1
5 . 1
5 . 1
5 . 1
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF
DESCRIPTION OF THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL P
OL P
OL PANEL
ANEL
ANEL
ANEL
ANEL
The control panel is managed by a microprocessor. The temperature detection system is controlled by a thermocouple. The large display
improves the appliance management by making read-outs and functions promptly available. The main feature of the panel is the all-automatic
management of the boiler. The controls and displays are described below.
4
1
5
3
17 : 15
Auto
62
68
WORK
7
2
6
