Battery Cap
Battery Po)
side up towards Cap
+
-
8
Electronic Ignition
461262508 • 21
Remove the large HEX NUT from the Electronic
Ignition. Insert the EI Module into the hole of the
downside panel left, then use the HEX NUT to secure
the EI Module to the panel (A).
Insert
AA
battery into ignitor,
negative (—) end first
.
Screw the Battery Cap to the EI Module (B).
A
Downside panel Left
El Module
Battery Cap
Hex Nut
Some components are not
shown for the clarification of
illustration
B
Note: After finishing above step, please check wiring connections whether as below, if not, correct them as below.
1
2
3
4
0
x
–
A
B
Fibre wires, one black
and three whites
PVC wires, black and red
Some components are not
shown for the clarification of
illustration