9. The rotating intake meter (F) (if present) can be used to manually track how many bottles of liquid that are consumed.
To use the intake meter, manually rotate the meter to the number “1” position as shown and after each bottle of liquid
is consumed, rotate the meter counterclockwise to the next higher number to track your consumption.
HARD SPOUT LID (IF PRESENT):
1. Remove lid (A) by twisting counterclockwise.
2. Unlock the drinking spout cover (B) by twisting spout cover counterclockwise until
the cover fully stops twisting (about 1/4 turn). Pull up on spout cover to open and
expose drinking spout (C).
3. Pull out O-ring gasket (A1) from underside of lid (A) and spout cover gasket (B1) from
underside of spout cover (B).
4. Wash all parts separately and re-assemble.
a. Ensure gaskets are properly seated to minimize leaking.
5. Fill container with contents. Do not overfill: Leave space for lid (A) to avoid overflow.
6. Replace the lid (A) by twisting it clockwise.
7. To drink, unlock the drinking spout cover (B) by twisting spout cover counterclockwise
until the spout cover fully stops twisting (about 1/4 turn). Pull up on spout cover to open
and expose drinking spout (C).
8. When finished drinking, close and lock the spout cover (B) by twisting spout cover clockwise
until the spout cover fully stops twisting (about 1/4 turn
WARNINGS
- DO NOT use product in microwave, on stove-top, or in any type of oven.
- NOT FOR USE WITH HOT LIQUIDS: For cold liquids only. Hot liquids may burn or scald user.
- Always test temperature of contents before consuming.
- DO NOT overfill the container: Leave space at top of container for lid to avoid overflow.
- If applicable to product, the carabiner style attachment on the lid is not intended for climbing. It is intended solely for
the purpose of attaching keys to the product or attaching the product to backpacks or other gear for transport.
- Check periodically to make sure any gasket (flexible band around lid and/or stopper) is present and properly
positioned to prevent contents from passing through stopper when stopper is closed (if applicable to product).
Missing, worn or misaligned gaskets may cause product to leak.
- In general, contents should not be left in container for longer than 24 hours. However, the rate at which contents spoil
depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner.
Proceed with caution when using the product with quick spoiling contents.
- If contents are left in container longer than 24 hours, or you suspect spoilage, use caution when opening container.
Contents spoilage can cause pressure inside container to build, possibly leading to forceful ejection of stopper or
contents. In such circumstances, before attempting to open container, ENSURE THE OPENING IS POINTED AWAY
FROM THE USER OR OTHER PERSONS TO AVOID INJURY.
- DO NOT use tools or devices to force container to open.
- If you are unable to open container by hand, do not open it and dispose of it at your local waste facility.
- DO NOT use to store or carry carbonated drinks or dry ice. This may cause lid/stopper and contents to
eject forcefully or leak.
* Image for reference only: actual product may vary
A
B
B1
A1
C
