1
Read and Follow These Important Instructions
When using the electrical equipment, basic safety precautions should always be followed. A
green colored terminal marked G, GR, Ground, Grounding or the Symbol is located inside
the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must
be connected to the grounding means provided in the electric supply service panel with a con-
tinuous copper wire equivalent in size to the circuit conductors supplying this equipment. At least
two lugs marked “BONDING LUGS” are provided on the external service or on the inside of
the supply terminal box or compartment. To reduce the risk of electric shock, connect the local
common bonding grid in the area of the spa or spa to these terminals with an insulated or bare
copper conductor not smaller than No. 6 AWG. All field-installed metal components such as rails,
ladders, drains, or other similar hardware within three meters of the spa or spa shall be bonded
to the equipment grounding bus with copper conductors not smaller than No. 6 AWG.
Proper Use and Installation
ThermoSpas has made every effort to provide you with a safe and reliable product. The detailed
instructions provided previous to, and with the receipt of, your spa will explain how to safely in-
stall, operate and maintain your spa. Safety in using a spa ultimately lays with you the customer.
There is no substitute for the use of good judgment and common sense when it comes to safety
in and around your spa.
Safety In and Around Your Spa
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY!
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
• Extreme caution must be exercised to prevent unauthorized access by children.
• To avoid accidents, ensure that children do not use this spa unless supervised at all times.
Adult supervision is a critical safety factor in preventing children from drowning.
• Use the straps and clip tie downs to secure the spa cover when not in use. This will help
discourage unsupervised children from entering the spa. Keep the spa cover secure in high-
wind conditions.
• There is no representation that the cover, clip tie-downs, or actual locks will prevent access to
the spa.
!
DANGER: RISK OF SEVERE INJURY OR DROWNING!
• Keep hair, loose articles of clothing or hanging jewelry away from suction fittings, rotating jets
or other moving components to avoid entrapment that could lead to drowning or severe injury.
• Never use the spa unless all suction guards, filter, filter lid, or skimmer assembly are installed
to prevent body and/or hair entrapment.
• Never operate or use the spa if the filter, filter lid, or skimmer assembly are broken or any part
of the skimmer assembly is missing. Please contact your dealer or nearest service center for
service.
• The suction fittings and suction covers in this spa are sized to match the specific water flow
created by the pump(s). If it is necessary to replace the suction fittings, suction covers or
pump(s), be sure that the flow rates are compatible and are in compliance with the VGB
Safety Act.
• Never replace a suction fitting or suction cover with one rated less than the flow rate marked
on the original suction fitting. Using improper suction fittings or suction covers can create a
body or hair suction entrapment hazard that may lead to drowning or severe injury.
Safety Requirements
Summary of Contents for Atlantis Genesis 200
